New products

Experience more. Consume less. Fre with MagSafe, the WaterProof iPhone case, is sealed to go everywhere and built using 60% recycled plastic. Always slim with a modern silhouette, Fre is right at home in the office, the ocean and the gallery opening. And when you get one, you can give $1 (on us) to one of our water-minded non-profits. Features Wireless Charge Compatible Waterproof / Dustproof Military Grade Protection Gross Weight is 0.1 gm Height is 2cm Width is 19.2cm Depth is 19.2cm

The Defender XT case is a streamlined version of the classic but with increased drop protection. Rugged and reliable phone protection in a thin case and designed for seamless integration with MagSafe technology. Features 2.4M Drop Tested Military Grade Protection Magnetic Mount Gross Weight is 0.08gm Height is 1.8cm Width is 11cm Depth is 20.5cm

Fre allows you to experience more, while consuming less! Waterproof and sealed from dirt, dust and snow, the Fre case is right at home in the office, the ocean and the gallery opening. Made with over 60% recycled materials and when you get one, you can give $1 (on us) to one of our water-minded non-profits. Features: Military Grade Protection Waterproof / Dustproof Wireless Charge Compatible Gross Weight is 0.1 gm Height is 2cm Width is 19.2cm Depth is 19.2cm

The ultimate screen protection for Samsung Galaxy Tab S7 case friendly. PanzerGlass™ screen protector is made of flat tempered glass and covers the entire front surface of the device. The glass features full silicone adhesive which is carefully optimised to match the screen and device perfectly whilst saving perfect touch sensitivity and still delivering the superior PanzerGlass™ strength. Features Full frame coverage Rounded edges Crystal clear 100% touch preservation  Original PanzerGlass

As a wireless charger, it provides 15W Qi-certified fast wireless charging with an overcharge and temperature detection chipset. It also comes with LED ambient light that will change colour based on the charging status. As a phone holder, it can be connected to the air vent of your car or simply works as a suction car mount. It features an infrared sensor clamp that will automatically close the motorised arms when your phone is docked -- perfect for those looking after a one-handed mounting system! For quick release of your phone, simply press the button on the side -- the button will work using residual power even if you turn off your car so your phone will never get stuck. Its 360-degree ball-joint allows different viewing angles and the adjustable footrest depth allows it to work with most slim-fit phone cases. Features: Easy installation - no tools required Attaches to the Air vent or works as a suction car mount 360 rotation with adjustable ball-joint for multiple viewing angles Screw-lock extendable arm & adjustable angle Adjustable footrest depth Works great with most slim-fit protective phone cases Built-in Smart sensor: tap to instantly open/unlock the holder arms The clamp will automatically close when your phone is docked Side button for Quick Release -- the button works even if not powered Built for one-handed use. Supports Qi-Certified fast wireless charging LED ambient light that change colour based on standby and charging states Overcharge and temperature detection chipset Up to 15 Watt power output Overview: Brand: Baseus Wireless phone charger Automatically secure mobile with built-in sensor Quick-release via the side button Easy installation without any tools LED lights to indicate charging status 15W power output What's in the Package? Baseus 15W Wireless Charger Car Mount Holder (WXHW03-01) Air vent attachment Suction cup pedestal attachment USB Type-C Cable (1m) User Manual Warranty Card

Our iconic Presidio2® Pro case featuring Presidio2 Armor Cloud Technology with 13-foot drop protection and scratch resistance. Features a soft-touch coating and Microban® antimicrobial protection. PRESIDIO®2 ARMOR CLOUD™ TECHNOLOGY When dropped, air capsules compress and suspend your phone on a protective cushion of air, just like an airbag. These phone-loving airbags are designed to absorb shock and resist damage to your device. UNIQUE, SOFT-TOUCH FINISH The unique soft-touch finish for a better look, enhanced feel, and added scratch resistance to keep your case looking great. PROVEN MICROBIAL PROTECTION Only Speck has Microban®. Their antimicrobial product protection delivers a 99% reduction in bacteria growth on the case, creating a cleaner surface. Life gets dirty, we keep your case cleaner. UP TO 13-FOOT DROP PROTECTION* The re-engineered and advanced design protects your phone against drops of up to 13 feet. RAISED BEZELSCREEN PROTECTION This added bit of protection is designed to resist screen shatters or cracks for those times when your phone falls and lands face-down. SLIM DESIGN FOR WIRELESS CHARGING Designed to be thin enough to allow for easy wireless charging while the case is still on your phone. Features: Up to 13-foot drop protection for extreme durability Presidio®2 Armor Cloud™ technology cushions and protects your phone like an airbag Soft-touch finish for a better look and added scratch-resistance Microban® reduces bacteria growth by 99% to protect the case creating a cleaner surface Advanced ultra-responsive buttons for smoother clicks and volume control Raised bezel screen protection Slim design allows for easy wireless charging

PanzerGlass™ screen protector for iPhone 13 and 13 Pro in black with Privacy features the same core benefits as the original glass, while also protecting the content of the display. A confidentiality filter renders the content of the display almost invisible to everyone except the user of the device. At the same time, it reduces blue light exposure and features an anti-glare coating, that reduces light reflections without affecting the visibility of the display. Features Privacy glass Crystal clear 100% touch Resistant to scratches Shock absorbing Easy to install Original PanzerGlass

Ditch the cable and experience the magic of magnetic wireless charging. The pocket-size Mag5000 power bank comes with built-in magnets that perfectly align with iPhone 12 MagSafe technology, allowing both the power bank and phone to snap together for a seamless wireless charging solution on the move. Compatible with MagSafe The magnets built inside this power bank perfectly align with MagSafe technology inside iPhone 12 to allow your phone to maintain the perfect charging position. This power bank is compatible with official MagSafe and Magnetic charging accessories. Up to 15W fast charging Simply place the power bank on the back of your phone for instantaneous charging. Mag5000 will snap to your phone in perfect charging position and support up to 15W fast wireless charging. One ring to charge them all No iPhone 12? No worries, simply apply our sleek attachment ring to the back of any wireless capable phone and experience fast, magnetic wireless charging (7.5W Max). Pocket-size power Sporting a stylish fabric finish, this pocket-size power bank is both thin and lightweight, allowing you to discreetly stay charged on your travels without the bulk. Recharge in no time with 18W USB-C input Mag5000 not only delivers a fast charge to your phone, it also accepts a fast recharge thanks to an 18W USB-C input. Avoid the frustration of long recharge times with the Mag5000 charge levels being restored quickly. Meet our Magnetic family Magnetic wireless charging is the new ecosystem for how we charge all our devices going forward. Features Strong, precise magnetic alignment Compatible with MagSafe technology 7.5W wireless charging Slim, lightweight design Specifications: Lithium Battery: 5,000 mAh/18.5Wh, Input: 5.0V⎓2.4A (12.0W), 9.0V⎓2.0A (18.0W) USB-C Output: 5.0V⎓2.4A (12.0W) Wireless Output: 7.5W Total Output: 12.0W Max Compatible with iPhone 12 and iPhone models that support MagSafe technology Compatible with Qi wireless charging Mag5000 Magnetic Wireless Power Bank Attachment Ring Applicator Guide Manual & Warranty Card Colour: Black Please be advised that some cases for your phone may have a protective bump or large lip which prevents the battery pack to attach with your phone cleanly.Please check and do your own research as returns for this would be considered a change of mind/wrong purchase and may not be accepted for returns.  

The Symmetry case is anything but basic. The one-piece, ultra-thin design is pocket-friendly and compatible with MagSafe whilst offering durable protection. Features Wireless Charge Compatible Sleek/Stylish/Pocket Friendly Gross Weight is 0.07 gm Height is 1.8 cm Width is 20.2 cm Depth is 20.2 cm Device Compatibility: Compatible with Apple - iPhone 13 Pro (6.1")

The OtterBox Strada Series is a classic, distinctive folio case for your iPhone featuring a functional, fashionable design that protects your device and your screen. With a card holder for cash or cards and a classic look combined with a modern aesthhetic, Strada Series is the timeless case crafted to command attention. Features Wireless Charging Compatible Leathers Credit Card Storage Gross Weight is 0.11 gm Height is 1.7 cm Width is 21 cm Depth is 21 cm Device Compatibility Compatible with Apple - iPhone 13 Pro (6.1")

The top-Selling Soap Bubble case just got an upgrade. Equipped with MicroPel protection, rest assured your case is automatically set up for ultimate hygiene. Micropel Protection is the premier technology worldwide for effeective, long-lasting and responsible control of microbial growth. Keep it soapy, keep it clean! Features include 10 foot drop protection, FDA approved MicroPel l Protection, iridescent swirl effect and anti-Scratch Protection. Features Leathers Credit Card Storage Fashion/Patterned Gross Weight is 0.08 gm Height is 1.9 cm Width is 10.9 cm Depth is 20 cm Device Compatibility: Compatible with Apple - iPhone 13 Pro (6.1")

The snap+ wireless vent mount enables you to make hands-free calls and makes GPS directions easier to follow. The magnetic array on the snap+ wireless charging vent mount works with MagSafe compatible devices. Attach the included snap adapter to any smartphone to make it compatible with the snap+ wireless charging vent mount. The magnetic array ensures accurate placement so charging begins on contact. The snap+ wireless charging vent mount can charge through cases up to 3mm thick. Engineered to deliver up to 15W of power. Use your phone in portrait or landscape mode and get the perfect viewing angle with pan-tilt positioning. * 15W for Android. 7.5W for iOS Features Vent Mount 3.0A (15w) Output Gross Weight is 0.17 gm Height is 5.5cm Width is 11cm Depth is 20cm Device Compatibility: Compatible with Apple - iPhone 12 Compatible with Apple - iPhone 12 mini Compatible with Apple - iPhone 12 Pro Compatible with Apple - iPhone 12 Pro Max Compatible with Apple - New iPhone 2021 (5.4) Compatible with Apple - New iPhone 2021 (6.1 Pro) Compatible with Apple - New iPhone 2021 (6.1) Compatible with Apple - New iPhone 2021 (6.7)